R32 is the refrigerant used in most new air conditioning systems — replacing older R410A with a refrigerant that has a lower global warming potential and slightly higher efficiency. All the domestic systems we install use R32 as standard. We supply and install R32 air conditioning across Leicester.
See why homeowners and businesses across Leicester choose Elite Cooling & Heating for new air conditioning systems.
Refrigerants used in air conditioning systems are regulated under the F-Gas regulations because they are potent greenhouse gases if released to atmosphere. Each refrigerant is measured by its Global Warming Potential (GWP) — the amount of warming caused per kilogram released relative to CO2. R410A, which was the standard domestic AC refrigerant for 20 years, has a GWP of 2,088. R32, which has replaced it in the majority of new domestic systems, has a GWP of 675 — less than a third of R410A's impact.
R32 also has thermodynamic properties that allow slightly smaller refrigerant charges for the same cooling capacity, and it tends to produce marginally higher efficiency ratings in well-optimised systems. It is classified as A2L — mildly flammable, but at concentrations far above those encountered in normal air conditioning operation. All new units are designed to handle R32 safely, and all our engineers are trained and F-Gas certified to work with it. If you have an older R410A system, your next replacement will be R32 — and you will notice the improved efficiency.
All our F-Gas certified engineers are trained to handle R32 refrigerant safely. R32's A2L classification requires specific procedures and equipment — we meet all requirements as standard.
We assess your property, specify the right R32 system and provide a fixed written quote. Free, no-obligation survey across Leicester and surrounding areas.
Get in TouchR32 is the refrigerant choice for new air conditioning systems — better for the environment and slightly more efficient.
GWP of 675 versus 2,088 for R410A — substantially lower environmental impact if refrigerant is released.
R32's thermodynamic properties allow slightly higher efficiency ratings than comparable R410A systems.
Less refrigerant required per unit of cooling capacity — lower material cost and less to recover at end of life.
R32 is compliant with current and upcoming F-Gas regulations — no phase-down issues for new installations.
R32 systems will not be subject to refrigerant availability issues from F-Gas quota reductions for the foreseeable future.
R32 is now the standard refrigerant for domestic AC worldwide — full supply chain support for the long term.
R32 refrigerant is available across all domestic unit types and most commercial system formats.
All domestic wall-mounted systems we install now use R32 as standard.
R32 multi-split systems for 2–5 indoor units from a single outdoor unit.
R32 ceiling cassette units for commercial offices and retail environments.
R32 floor-standing units for conservatories and large living rooms.
R32 slim duct and concealed ducted systems for high-spec installations.
Ultra-quiet R32 bedroom units with sleep mode and overnight scheduling.
Compact R32 wall-mounted units sized for home office environments.
R32 split and multi-split systems for small offices, retail and clinics.
Professional R32 AC installation by F-Gas certified, R32-trained engineers.
We assess your property and calculate the cooling and heating load to size the R32 system correctly.
Fixed written quote for supply and installation of a correctly specified R32 system.
F-Gas certified, R32-trained engineers install and commission the system to manufacturer standards.
F-Gas installation record and full handover documentation provided on completion.
All major manufacturers have transitioned their domestic ranges to R32 — we install the leading brands.
We install R32 air conditioning systems throughout Leicester and surrounding areas.
Yes. R32 is classified as A2L — mildly flammable — but it requires concentrations far above those encountered in a normal installation to ignite, and even then only under specific conditions. Manufacturers design all R32 units with safety features to address this classification, and all our engineers follow correct installation procedures for A2L refrigerants.
No — handling refrigerants requires F-Gas certification under UK law. Only a certified engineer can recover, charge or recharge R32 refrigerant. Our engineers are fully certified to work with R32 and carry the appropriate recovery and charging equipment.
No. R32 has a GWP of 675, which is well below the thresholds targeted by current F-Gas regulations for phase-down. Unlike R404A and R410A, R32 is not subject to imminent phase-out. A new R32 system installed today will have a working life of 15+ years without refrigerant availability concerns.
No — R32 and R410A are different refrigerants and the systems are not interchangeable. An R410A system must be serviced and recharged with R410A. When it reaches the end of its life, the replacement will be an R32 system.
Contact Elite Cooling & Heating for R32 air conditioning installation across Leicester and surrounding areas.
Request a Free Quote